5.1.2 ALARM OUT
▪ SIGNAL : Select on/off to use alarm by channel.
▪ ALARM SET TEST : Check the alarm connection whether it works properly or not.
Press the [SET] button then alarm device will be operated.
▪ ALARM CLEAR TEST : Press the [CLEAR] button then alarm device will not be operated.
▪ ALARM CLEAR TEST : Press the [CLEAR] button then alarm device will not be operated.
5.1.3 DISK
[INSTALL
] - Display initial HDD install and information.
25
※ NOTE :
When install HDD first time,
after install HDD, should
format by the [INSTALL]
button.