Eclipse Security Tribrid User Manual page 34

SN Icon
9 VIDEO IN
1～16
NO1～NO5
10
C1～C5
NC5
A
B
T+、T-、R+、
R-
CTRL 12V
11
12 VGA
13 HDMI1
14 HDMI2
Name Function
Video input Connect to analog camera, video input signal.
port

Alarm input
port 1～16


Alarm output
port 1～5



RS485_A port. It is the cable A. You can connect to the
control devices such as speed dome PTZ.
RS485
communicatio
RS485_B.It is the cable B. You can connect to the control
n port
devices such as speed dome PTZ.
Four-cable T+, T-: Send out cable.
full-duplex R+, R-: Input cable.
485 port.
Control power
Turn off power output when the alarm is cancelled.
output
Network port 1000M Ethernet port
VGA video VGA video output port. Output analog video signal. It can
output port connect to the monitor to view analog video.
High definition High definition audio and video signal output port. It
media transmits the same video signal as the VGA/TV.
interface 1 Support mouse operation.
High definition
HD video matrix output. Support zero-channel encoding
media
matrix output. Support tour.
interface 2
HDCVI Standalone DVR User's Manual
There are four groups. The first group is from port 1
to port 4, the second group is from port 5 to port 8,
the third group is from port9 to port 12, the fourth
group is from port13 to port 16. They are to receive
the signal from the external alarm source. There are
two types; NO (normal open)/NC (normal close).
When your alarm input device is using external
power, please make sure the device and the NVR
have the same ground.
5 groups of alarm output ports. (Group 1 ：port
NO1 ～ C1,Group 2:port NO2 ～ C2,Group 3:port
NO3 ～ C3. 4:port NO4 ～ C4. 5:port NO5 ～
C5.).Output alarm signal to the alarm device. Please
make sure there is power to the external alarm
device.
NO：Normal open alarm output port.
NC：Normal close alarm output port.
C：Alarm output public end.
25