Eclipse Security Tribrid User Manual page 103

4.10.1.3 Encode
It is to set video bit stream, picture bit stream, video overlay param eter and etc.
4.10.1.3.1 Video
Video setting includes the following items. See Figure 4-55.

Channel: Select the channel you want.

Type: Please select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.

Compression: System supports H.264 and MJPEG.

Resolution: System supports various resolutions, you can select from the dropdown
list. Please note the option may vary due to different series.

Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set
video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.

Video/audio: You can enable or disable the video/audio.

Audio format: Please select from the dropdown list. There are three options:
G711a/G711u/PCM

Audio source: Please select from the dropdown list. There are two options:
normal/HDCVI. For normal mode, the audio signal is from the Audio In port. For
HDCVI mode, the audio signal is from the coaxial cable of the camera.
HDCVI Standalone DVR User's Manual
Figure 4-54
94