Front Panel And Side Of Phone; Back Panel; Spa92X, Spa94X, And Spa962 Hardware Features - Linksys 900 Series Administrator's Manual

Chapter 2 Getting Started

Front Panel and Side of Phone

Feature
Message waiting light
STATUS
FLASH
REDIAL

Back Panel

Port
Phone jack
Ethernet port
Power

SPA92x, SPA94x, and SPA962 Hardware Features

The SPA921, SPA922, SPA941, SPA942, and SPA962 provide LCD displays and other
additional hardware features, including the following:
•
•
•
•
•
•
•
•
•
•
•
•
Document Version 3.1
Four Illuminated Call Appearance Line Buttons with Tricolor LED's
LED Indicates Line State – Active, Idle, On-Hold, Unregistered
Line LED Configurable to 13 Different States (On/Off, Color, Flash)
Dedicated Illuminated Buttons for:
• Audio Mute On/Off
• Headset On/Off
• Speakerphone On/Off
Four Soft Key Buttons
Four Way Rocking Directional Knob for Menu Navigation
Voice Mail Message Waiting Indicator Light
Voice Mail Message Retrieval Button
Dedicated Hold Button
Settings Button for Access to Feature, Set-up, and Configuration Menus
Volume Control Rocking Up/Down Knob Controls Handset, Headset, Speaker, Ringer
Standard 12-Button Dialing Pad
Function
On: you have a voicemail message.
Off: make a call. On: make a call; line is shared. Flashing:
shared line on hold. On red: line in use. Flashing red: local
call on hold. On orange: phone not registered.
Press to pickup a second incoming call, transfer a call, or
setup a three-way conference call.
Press the redial the last number called.
Function
Connect to the handset.
Connect to the SPA9000 through a local switch.
Connect to the 5-volt power supply.
Linksys 900 Series IP Phone Administrator Guide
Linksys 900 Series IP Phones
2-3