Status Information; Figure 4-3: Standby Screen - Linksys WIP330 User Manual

Status Information

The standby screen will display a variety of information about the IP Phone.
Wireless Signal Strength
At the top of the screen, the icon on the left indicates wireless signal strength.
Time Display
The current time is shown. To change this time and its format, analog or digital, use the main menu.
Status of the IP Phone
The IP Phone has three status messages. "Ready" indicates that the IP Phone is ready to make and receive
calls. "Not Ready" indicates that the IP Phone has no wireless connection. "Not Registered" indicates that the IP
Phone does not have a registered phone number.
Date Display
The date display gives you the current date. You can change this date using the main menu.
Battery Strength
The icon on the right of the screen indicates battery strength of the IP Phone.
Chapter 4: Configuring the Wireless-G IP Phone
Status Information
Wireless
Signal
Strength
Figure 4-3: Standby
Screen
Wireless-G IP Phone
Battery
Strength
27