Using The Service - Linksys SPA-942 Quick Start Manual

4. using the service

Making telephone
calls
using a telephone
number
using a personal
directory
dialling From the
redial List
speed dialling
note: You may need to dial an access code to reach an outside line. Talk to your Phone
Administrator about your company's specific dialling rules/plan.
You can place a call by:
• Lifting the handset and dialling immediately; or
• Connect the headset, press the headset button and dial; or
• Press the speaker button and dial. (you can also select a different line).
You will see called party ringing and connected in sequence as the call is being
connected.
At the end of the call, hang up the phone to disconnect. For headset or speaker, you
must push the headset or speaker button to end the call.
To create entries in your Personal Directory, refer to Directory in the Setup section.
• To view the directory, press the soft button below dir or the setup button, then 1.
• Use the navigation button to highlight your choice.
• You can dial, delete, edit, cancel, copy or paste an entry by pressing the soft button
beneath your choice.
• You can also dial by highlighting your choice and either lifting the handset, pressing the
speaker or headset button.
• To redial the last number called, press the soft button below redial.
• Use the navigation button to highlight your choice. Lift the handset and the number will
automatically be dialled.
• You can also dial by highlighting your choice and pressing the speaker or headset
button.
To setup speed dial numbers, refer to Speed Dial in the Setup section.
To Dial a Speed Dial number:
• Dial the speed dial number and then lift the handset; or
• Lift the handset (or enable the headset or speaker) and dial the speed dial number,
followed by the # button on the phone; or
• Dial the speed dial number and press either the speaker or handset button.
The entry in the speed dial memory will be dialled automatically.