General Operation - LawnMaster CLHT4022K Operator's Manual

OPERATION
Starting With Two Handed On/Off Switch
● Hold the hedge trimmer with the right hand at the rear handle and with the left hand, squeeze
the safety switch found at the front handle.
● Slowly squeeze the on/off switch to power on trimmer (Fig. 4).
● To turn hedge trimmer off simply releace either of the switched and power to unit will stop.
Front Handle Safety Switch

General Operation

● Check the product, its battery pack and charger as well as accessories for damage before each use.
Do not use the product if it is damaged or shows wear.
● Double check that accessories or application tools are properly fixed.
● Always hold the product by its handles. Keep the handles dry to ensure safe support.
● Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft
brush. Blocked air vents may lead to overheating and damage the product.
● Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
● Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
WARNING
To avoid injury and to reduce the risk of electrical shock or fire:
• Replace the battery pack or charger immediately if the battery case or charger cord is damaged.
• Always make sure the hedge trimmer switch is OFF before inserting or removing the battery pack.
• Always make sure the battery pack is removed and the switch turned OFF, before inspecting,
adjusting, or maintaining any other part of the hedge trimmer.
• Read, understand, and follow the Battery Charger instructions.
Power Switch
12
Fig. 4