Table of Contents
Advertisement
OPERATION
WARNING
To avoid personal injury:
• Handle the blade with care.
• Do not place your fingers or hand between the notches in the blade or in any position where they
could get pinched or cut.
• Never service the blade or hedge trimmer unless the battery pack is removed.
• Do not use if the blade assembly is damaged or bent.
Take to a qualified person to straighten, replace, or sharpen.
• Always keep both hands on the hedge trimmer handles to prevent your hand from touching the
blade.
IMPORTANT!
Lubricate the blade before and after each use. Ignoring this step will decrease blade life and hamper
operation. (See the Maintenance Section)
Trimming (See figs. 5-6)
● Cut and remove branches exceeding the cutting capacity of this product using a proper pruner
before operation.
● Move the cutting device lightly through the cutting surface in a sweeping motion following the
shape of the hedge or shrub.
●
A slight tilt downwards of the cutting device in the direction of motion is recommended for
optimum cutting performance.
● Do not to rush and do not attempt to cut too much with one stroke of the cutting device.
● First cut both sides from the bottom cutting upwards to the top.
● This will prevent any of the trimmings falling into the path of the area still to be cut (Fig. 5).
●
After cutting the sides proceed to the top (Fig. 6).
Fig. 5
13
Fig. 6
Advertisement
Table of Contents
