General Operation - LawnMaster CLGT1018B01 Operator's Manual

OPERATION
Flower Guard (See figs. 28-29)
Use the yoke to keep distance to obstacles that could be hit by the cutting device.
Fig. 28 , working position
WARNING! Adjust the Flower Guard position only when the product is switched off and
the cutting device is at a complete stop!

General Operation

use. Do not use the product if it is damaged or shows wear.
brush. Blocked air vents may lead to overheating and damage the product.
the working area. Always let the product come to complete stop before putting it down.
have full control over the product.
Trimming
discharge of grass clippings, and could cause you to slip and fall.
Fig. 29 , storing position
16