Environmentally Safe Battery Disposal - LawnMaster CLHT4022K Operator's Manual

MAINTENANCE
CLEANING THE BLADES
● Keep the cutting blades clean and free of debris.
NOTE: Remove battery before performing any maintenance.
● Use a brush or high pressure air (max. 3 bar) to remove debris from the blades.
● With gloves on, clean the product with a dry cloth to remove loose material.
● Apply a small amount of suitable lubricant on the cutting device to retain a good cutting performance.
● Keep the cutting device sharp. Have a worn or damaged cutting device replaced with a new one
of the same type by a qualified specialist.
● Adjustment of the distance between blades is not necessary, as this is predetermined by the
manufacturer.

ENVIRONMENTALLY SAFE BATTERY DISPOSAL

WARNING
If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Dis
pose of it and replace with a new battery pack. DO NOT ATTEMPT TO REPAIR IT!
To avoid injury and risk of fire, explosion, or elecrivc shock, and to avoid damage to the environ ment:
• Cover the battery's terminals with heavy-duty adhesive tape.
• DO NOT attempt to remove or destroy any of the battery pack components.
• DO NOT attempt to open the battery pack.
• If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the
solution in the eyes or on skin, and do not swallow it.
• DO NOT place these batteries in your regular household trash.
• DO NOT incinerate.
• DO NOT place them where they will become part of any waste landfill or municipal solid
waste stream.
• Take them to a certigied recycling or disposal centre.
15