Operating; Assembly - LawnMaster CLHT4022K Operator's Manual

ASSEMBLY

Battery Pack And Charger (NOT INCLUDED)
NOTE: Please consult the instructions for use supplied with battery pack and charger for more details.
Attach / Release
● Align the battery pack (A) to the slots of the battery dock and slide in until it snaps in place (Fig. 2).
● Press the release buttons (both sides) (B) on the battery pack (A) and remove it from the
product (Fig. 3).
1a
OPERATION
Starting And Stopping
● Make sure the on/off switch is in its off position.
● Attach the battery pack to the product. Ensure it snaps in place.
● Your product is now ready to be used.
Intended Use
This hedge trimmer CLHT4022K is with rated battery voltage of 40V. This hedge trimmer is charged
with a charger which output is 40V.
The product is intended for trimming hedges, bushes and shrubs. Observe the technical data for
the maximum cutting capacity. Do not cut branches exceeding the stated maximum capacity.
This product is intended for private domestic use only, not for any commercial trade use. It must
not be used for any purposes other than those described.
A
1
Fig. 2
11
A
1.
B
1.
2.
Fig. 3