Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LawnMaster CLHT4022K
Summary of Contents for LawnMaster CLHT4022K
-
Page 1: Operators Manual
Operators Manual EN p. 2 40V-22"LI-ON CORDLESS HEDGE TRIMMER CLHT4022K CLHT4022K_V1 Read all safety rules and instructions carefully before operating this tool. Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432... -
Page 2: Table Of Contents
CONTENTS CONTENTS PRODUCT SPECIFICATIONS GENERAL SAFETY RULES ELECTRICAL INFORMATION SYMBOLS KNOW YOUR CORDLESS HEDGE TRIMMER ASSEMBLY 10-11 OPERATING 11-14 MAINTENANCE 14-15 ENVIRONMENTALLY SAFE BATTERY DISPOSAL WARRANTY POLICY EXPLODED DIAGRAM PARTS LIST NOTES PRODUCT SPECIFICATIONS 40V LITHIUM-ION CORDLESS HEDGE TRIMMER TYPE Cordless, Battery-powered CUTTING DEVICE Precision Laser Cut Blades... -
Page 3: General Safety Rules
GENERAL SAFETY RULES WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and / or serious personal injury. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. - Page 4 GENERAL SAFETY RULES moving parts. • Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance. • Do not allow to be used as a toy. Close attention is necessary when used by or near children. •...
- Page 5 ELECTRICAL INFORMATION possible special disposal instructions. • Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. • Do not place battery tooles or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
-
Page 6: Electrical Information
ELECTRICAL INFORMATION • If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. • Maintain tool with care. Keep fan and blade area clean for best and safest performance. -
Page 7: Symbols
SYMBOLS On the product, the rating label and within these instructions you will find among others he following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. SLOBMY NEMA DNOITANALPXE/NOITANGISE Volts Voltage Amperes Current Hertz... -
Page 8: Symbols
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not DANGER avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. -
Page 9: Know Your Cordless Hedge Trimmer
KNOW YOUR CORDLESS HEDGE TRIMMER Know Your Product This LawnMaster cordless hedge trimmer features laser cut blades made of special-grade steel. When trimming, slowly cut in a back and forth linear shearing motion. NEVER force the tool, let the tool do the work. -
Page 10: Assembly
ASSEMBLY DANGER If the hedge trimmer blade jams or gets caught on an electrical cord or wires, DO NOT TOUCH THE BLADE FOR ANY REASON! IT CAN BE ELECTRICALLY LIVE AND CAUSE SERIOUS OR FATAL INJURY! Release or drop the trimmer in the quickest, safest way. If possible, disconnect the dbattery from the tool. -
Page 11: Operating
● Your product is now ready to be used. Intended Use This hedge trimmer CLHT4022K is with rated battery voltage of 40V. This hedge trimmer is charged with a charger which output is 40V. The product is intended for trimming hedges, bushes and shrubs. Observe the technical data for the maximum cutting capacity. -
Page 12: General Operation
OPERATION Starting With Two Handed On/Off Switch ● Hold the hedge trimmer with the right hand at the rear handle and with the left hand, squeeze the safety switch found at the front handle. ● Slowly squeeze the on/off switch to power on trimmer (Fig. 4). ●... - Page 13 OPERATION WARNING To avoid personal injury: • Handle the blade with care. • Do not place your fingers or hand between the notches in the blade or in any position where they could get pinched or cut. • Never service the blade or hedge trimmer unless the battery pack is removed. •...
-
Page 14: Maintenance
OPERATION ● To store hedge trimmer, remove battery pack from unit and use the convenient protective tip to hang Hang Hole your hedge trimmer out of the way until next use (Fig. 7). Fig. 7 MAINTENANCE WARNING In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before adjusting, inspecting, or cleaning the hedge trimmer. -
Page 15: Environmentally Safe Battery Disposal
MAINTENANCE CLEANING THE BLADES ● Keep the cutting blades clean and free of debris. NOTE: Remove battery before performing any maintenance. ● Use a brush or high pressure air (max. 3 bar) to remove debris from the blades. ● With gloves on, clean the product with a dry cloth to remove loose material. ●... -
Page 16: Warranty Policy
WARRANTY POLICY We take pride in producing a high quality, reliable product. That’s why LawnMaster tools carry a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a thirty (30) day limited warranty will apply. -
Page 17: Exploded Diagram
EXPLODED VIEW CLHT4022K EXPLODED VIEW... -
Page 18: Parts List
PART LIST CLHT4022K PART LIST ITEM NO. PART NO. DESCRIPTION GH60DC.00.03 Right Cover Cap GH61DC.10.00.X1.01 Motor Housing Assembly GH60DC.00.02 Left Cover Cap GH61DC.40.00 Pcb Board TOTHYY.10.07 Spring GH70DC.00.02 Rear Handle WODQ10.02.20 Miro-switch GH13EP.00.07.X1.01 Press Board GH60DC.00.06.W2 Switch Connector GH60DC.00.04 Felt GH60DC.40.10.X1.02... -
Page 19: Notes
NOTES...
Need help?
Do you have a question about the CLHT4022K and is the answer not in the manual?
Questions and answers