Scale Competition; Safety Precautions; Items Required; Hardware & Accessories - GREAT PLANES Super Chipmunk Instruction Manual

SCALE COMPETITION

Though the Great Planes Super Chipmunk 1.20 is an ARF
and may not have the same level of detail as an "all-out"
scratch-built competition model, it is a scale model
nonetheless and is therefore eligible to compete in the Fun
Scale class in AMA competition (we receive many favorable
reports of Great Planes ARFs in scale competition!). In Fun
Scale, the "builder of the model" rule does not apply. To
receive the five points for scale documentation, the only
proof required that a full-size aircraft of this type in this
paint/markings scheme did exist is a single sheet such as a
kit box cover from a plastic model, a photo, or a profile
painting, etc. If the photo is in black and white, other written
documentation of color must be provided. Contact the AMA
for a rule book with full details.
If you would like photos of the full-size Super Chipmunk for
scale documentation, or if you would like to study the photos
to add more scale details, photo packs are available from:
Bob's Aircraft Documentation
3114 Yukon Ave
Costa Mesa, CA 92626
Telephone: (714) 979-8058
Fax: (714) 979-7279
E-mail: www.bobsairdoc.com
PROTECT YOUR MODEL, YOURSELF
& OTHERS...FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1.Your Super Chipmunk 1.20 ARF should not be considered
a toy, but rather a sophisticated, working model that
functions very much like a full-size airplane. Because of its
performance capabilities, the Super Chipmunk 1.20 ARF, if
not assembled and operated correctly, could possibly cause
injury to yourself or spectators and damage to property.
2. You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model. In a few cases
the instructions may differ slightly from the photos. In those
instances the written instructions should be considered
as correct.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in first-class
condition, and a correctly sized engine and components
(fuel tank, wheels, etc.) throughout the building process.
5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.
6. You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not flown this
type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for your
first flights. If you're not a member of a club, your local hobby
shop has information about clubs in your area whose
membership includes experienced pilots.
8. While this kit has been flight tested to exceed normal use,
if the plane will be used for extremely high stress flying,
such as racing, the modeler is responsible for taking steps
to reinforce the high stress points.
9. WARNING: The cowl, fuselage and wheel pants included
in this kit are made of fiberglass, the fibers of which may
cause eye, skin and respiratory tract irritation. Never blow
into a part (wheel pant, cowl) to remove fiberglass dust, as
the dust will blow back into your eyes. Always wear safety
goggles, a particle mask and rubber gloves when grinding,
drilling and sanding fiberglass parts. Vacuum the parts and
the work area thoroughly after working with fiberglass parts.
We, as the kit manufacturer, provide you with a top
quality, thoroughly tested kit and instructions, but
ultimately the quality and flyability of your finished model
depends on how you build it; therefore, we cannot in any
way guarantee the performance of your completed
model, and no representations are expressed or implied
as to the performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.

ITEMS REQUIRED

Hardware & Accessories
This is the list of hardware and accessories required to
finish the Great Planes Super Chipmunk 1.20 ARF. Order
numbers are provided in parentheses.
❏
.91 cu in [15cc] Two-stroke or 1.20 cu in [20cc] four-
stroke engine
❏
Propeller and spare propellers suitable for your engine
❏
6-Channel radio
❏
Servos: (1) 35 oz-in servo (throttle), (5) 50 oz-in servos
(ailerons, flaps, elevator), (1) 80 oz-in servo (rudder)
❏
(2) – 2" [300mm] Servo extension (HCAM2711 for Futaba
❏
(2) – Y-harness (HCAM2751 for Futaba)
3
® )