Wing Dowel Installation - Hangar 9 Alpha 40 ARF Assembly Manual


Step 13
Use hook and loop tape to secure the remote receiver above
the throttle servo as shown. Mount the receiver as high in the
fuselage and as far away from the main receiver as possible to
provide the best reception from your radio system.

Wing dowel Installation

Required Parts
Fuselage assembly Wing dowel (2)
Required Tools and Adhesives
Thin CA

Step 1
Locate the wing dowels for your aircraft.
26

Step 2
Use a hobby knife with a #11 blade to remove the covering
from the fuselage for the wing dowels.

Step 3
Slide the wing dowel into the pre-drilled holes in the front
of the fuselage. Center the dowel so it extends equally from
both sides of the fuselage.

Step 4
Slide the second wing dowel into the pre-drilled holes in the
rear of the fuselage. Center the dowel so it extends equally
from both sides of the fuselage.

Step 5
Apply thin CA into the joint between the dowel and fuselage
to keep it from moving.
Hangar 9 Alpha 40 ARF Assembly Manual