Hot Key Operation - Mitsubishi DPLUS 74SB -BKA Service Manual

4. Hot Key Operation

(A) Factory Mode: power on + '+' key + '-' key.
*To hide the Factory menu temporary in Factory mode:
Push "RESET" key once while Menu is displayed, then Menu disappears.
Push "RESET" key once more, then Menu reappears.
(B) Auto Alignment Mode: power on + '-' key.
(C) Diagnosis Mode : no sync power on + 'Reset' key.
(D) Factory Menu
TAB 1) BRIGHTNESS / CONTRAST
TAB 2) POSITION / SIZE
TAB 3) COLOR ADJUST
TAB 4) DISTORTION
4-3
: Brightness
: Contrast
: Left / Right (H.Position)
: Down / Up (V.Position)
: Narrow / Wide (H.Size)
: Short / Tall (V.Size)
: Sub Size (Sub H. size)
1: 9300K : Brightness
2: 8200K : Contrast
3: 7500K : Red Gain
sRGB: sRGB : Green Gain
5: 5000K : Blue Gain
6: N/A : Red Bias
: Green Bias
: Blue Bias
: ABL Adjust
: In / Out (Side Pincushion)
: Left / Right (Pin Balance)
: Tilt (Parallelogram)
: Align (Trapezoid)
: Rotate
: Top / Bottom Corner
: Vertical Linearity
: Vertical Linearity Balance