Hot Key Operation - Mitsubishi Diamond Plus 93SB Service Manual

4. Hot Key Operation

(A) Factory Mode: power on + '+' key + '−' key.
*To hide the Factory menu temporary in Factory mode:
Push "RESET" key once while Menu is displayed, then Menu disappears.
Push "RESET" key once more, then Menu reappears.
(B) Factory Menu
TAB 1) BRIGHTNESS / CONTRAST
TAB 2) POSITION / SIZE
TAB 3) COLOR ADJUST
TAB 4) DISTORTION
4-3
: Brightness
: Contrast
: Left / Right (H.Position)
: Down / Up (V.Position)
: Narrow / Wide (H.Size)
: Short / Tall (V.Size)
VG: Vertical GAIN(Vertical Sub Size)
: N/A
1: 9300K
: Red Gain
2: 8200K
: Green Gain
3: 7500K
: Blue Gain
sRGB: sRGB
: Red Bias
5: 5000K
: Green Bias
: Blue Bias
: Brightness
: Contrast
: In / Out (Side Pincushion)
: Left / Right (Pin Balance)
: Tilt (Parallelogram)
: Align (Trapezoid)
: Rotate
: Top Corner
: Bottom Corner
VF : Vertical Focus