Specifications - Mitsubishi DPLUS 74SB -BKA Service Manual

Specifications

Monitor
Specifications
Diagonal:
Picture Tube
Viewable Image Size:
Radius:
Video:
Input Signal
Sync:
Analog input:
Display Colors
Horizontal:
Synchronization
Vertical:
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
Vertical:
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Feet:
Storage Temperature:
Humidity:
Feet:
SB
Diamond Plus 74 Notes
Monitor
17 inch 90° deflection, 0.25 mm grille pitch,
16 inch medium short persistence phosphor,
50,000 mm aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors Depends on display card used.
30 kHz to 70 kHz Automatically
50 Hz to 120 Hz Automatically
640 x 480 @ 60 to 120 Hz Some systems may not support
800 x 600 @ 50 to 110 Hz all modes listed.
832 x 624 @ 50 to 106 Hz
1024 x 768 @ 50 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 864 @ 50 to 77 Hz recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 66 Hz optimal display performance.
315 mm/12.4 inches Dependent upon signal timing used,
236 mm/9.3 inches and does not include border area.
325 mm/12.8 inches Dependent upon signal timing used,
244 mm/9.6 inches and does not include border area.
AC 100 – 240 V, 50-60 Hz
1.5A @ 100-240 V
397 mm (W) x 392 mm (H) x 415.5 mm (D)
15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
16.8 kg
37.0 lbs
+5°C to +35°C / +50°F to +90°F
10% to 90%
0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
10% to 90%
0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
1-12
® screen.