Mitsubishi DPLUS 74SB -BKA Service Manual page 46

4. Cut the three Ties and disconnect the connectors "TPC" and "S301".
5. Remove the screw (PL-CPTS*3*8*15BF).
6. Remove the Anode cap from CRT.
NOTE: Carefully discharge the CRT anode by shorting it to ground before removing anode cap.
TPC Ties S301 Screw
7. Remove the two screws (#2CBRITS*4*12*15BF) and remove the Chassis Base from Cabinet Front ASSY.
screw (#2CBRITS*4*12*15BF)
3-4