Quick Operation Chart - Mitsubishi Diamond Scan 90E User Manual

1.9 Quick Operation Chart

To summarize the steps in connecting your computer and adapter with Diamond Scan 90e color
monitor and setting the necessary controls and switches, refer to the chart below.
Connect the power cord to the Diamond Scan 90e color
monitor and the signal cable between the Diamond
Scan 90e and the graphics adapter.
Turn on the computer.
Turn on the Diamond Scan 90e color monitor.
Set the controls and switches.
OK
If a problem appears.
OK
See 5. TROUBLESHOOTING
Call for your authorized MITSUBISHI
Product Support at 1-800-344-6352.
10
See 2.1 AC Power Connection
2.2 Signal Cable Connection
See 3. USER CONTROLS
4. FUNCTION CONTROLS
If the problem persists.