Specifications - Mitsubishi E55LCD Service Manual

Table of Contents

Advertisement

Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).
Get regular eye checkups.
Ergonomics
To realise the maximum ergonomics benefits, we recommend the following:
Use the preset Size and Position controls with standard signals.
Use the preset Colour Setting.
Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.
Do not use primary colour blue on a dark background, as it is difficult to see and may produce eye fatigue due to
insufficient contrast.

Specifications

Monitor Specifications
E55LCD (NL1503)
LCD Module
Diagonal: 38 cm/15 inches
Viewable Image Size: 38 cm/15 inches
Native Resolution (Pixel Count): 1024 x 768
Input Signal
Display Colours
Analog input: 16,194,277 (DITHERING)
Synchronization Range
Horizontal: 24.8 kHz to 60 kHz
Vertical: 50 Hz to 75.1 Hz
Viewing Angle
Left/Right: ±60
Up/Down: ±45
Image Formation Time
Landscape: 640 x 400 at 56 Hz / 70 Hz
Resolutions Supported
Active Display
Horizontal: 304 mm/12.0 inches
Area (Lanscape)
Vertical: 228 mm/9.0 inches
Power Supply
Current Rating
Dimensions
Landscape: 350.5 mm (W) x 362.1 mm (H) x 160.7 mm (D)
Weight
Environmental Considerations
Operating Temperature: 5 °C to 35 °C
Humidity: 30% to 80%
Altitude: 0 to 3,000 m
Storage Temperature: -20 °C to +60 °C
Humidity: 10% to 80%
Altitude: 0 to 9,500 m
NOTE:
Technical specifications are subject to change without notice.
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Compostite sync. TTL Level (Positive/Negative)
°
°
30ms (Typ.) tr
=10ms, tr
R
640 x 480 at 60 Hz / 67 Hz / 72 Hz / 75 Hz
720 x 400 at 70 Hz
800 x 600 at 56 Hz / 60 Hz / 72 Hz / 75 Hz
832 x 624 at 75 Hz
1024 x 768 at 60 Hz / 70 Hz / 72 Hz / 75 Hz
AC 100-240 V, 50-60 Hz
1 A @ 100-240 V
13.8 inches (W) x 14.3 inches (H) x 6.3 inches (D)
4.2 kg (9.3 lbs)
English-8
1-13
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.297 mm dot
pitch; typical 200cd/m
typical 300:1 contrast ratio.
Depends on display card used.
Automatically
Automatically
=20ms
D
Dependent upon signal timing used, and
does not include border area.
2
white luminence;

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nl1503 (b)

Table of Contents