Time Schedule - Huviron SK-V207IR-Z946 User Manual

4.2.4.1 PATTERN SCAN SETTING
1) Pattern Num :
2) Start Pattern Learn :
: Memory Left - Display the available number of memory.
3) Run Pattern :
4) Move the joystick to stop the pattern scan, after few seconds the pattern scan again
5) Send the command of pattern Stop or menu key to move out the pattern scan.
4.2.5 TIME SCHEDULE(Path : MAIN MENU / MOTION CONTROL / TIME SCHEDULE)
Schedule enables you to schedule a sequencing by day and time. Up to 8 timeline
can be selected for a day.
Chapter 4. Menu configuration and operating
Set pattern number.(1~4) Default value is 1.
To move P/T/Z to memorize pattern.
Press IRIS OPEN or Menu To Stop
Memory Left:
[Menu 4-13] Pattern Scan Set Menu
Run pattern.

TIME SCHEDULE -------------------------

Number:
Enable:
Master Enable:
Start Time:
End Time:
Time Act:
Set
Back
Exit
[Menu 4-14] Time Schedule Menu
31
000
1
Off
Current
00:00
00:00
SEQ1