Table of Contents
Advertisement
3.1.7 TIME SCHEDULE(
Schedule enables you to schedule a sequencing by day and time. Up to 8 timeline
can be selected for a day.
3.1.7.1 TIME SCHEDULE SETTING
1) Number :
Select number of schedule. Up to 8 timeline can be selected for a day.
Default value is 1.
2) Enable :
Determine whether to use this function or not.
3) Start Time :
then press again the IRIS OPEN or MENU key to select minute. After that you
should press the 'IRIS CLOSE' key to escape this menu.
4) End Time :
5) Time Act :
Select the sequencing action to schedule the action.
ㆍOFF :
No action.
ㆍPTRN 1~4 :
ㆍSEQ 1~8 :
ㆍCW :
Scan clockwise automatically.
ㆍCCW :
Scan counterclockwise automatically.
ㆍCustom :
6) Set :
Set : Save the value and then move out this menu.
Chapter 3. Menu configuration and operating
Path
: MAIN MENU / MOTION CONTROL / TIME SCHEDULE)
TIME SCHEDULE -------------------------
Number:
Enable:
Start Time:
End Time:
Time Act:
Set
Back
Exit
Set start time. Press the IRIS OPEN or MENU key to select hour and
Set end time.
The camera move as PTRN1~PTRN4.
The camera move as SEQ1~SEQ8.
The camera working Auto Scan mode by custom mode.
1
Off
00:00
00:00
SEQ1
36
Advertisement
Table of Contents
