Motion Control; Auto Scan - Huviron SK-V207IR-Z946 User Manual

4.2. MOTION CONTROL

4.2.1. AUTO SCAN(Path : MAIN MENU / MOTION CONTROL / AUTO SCAN)
This function is to make the camera panning automatically at the fixed speed. "TIL T" or
"Zoom" function can be set by user's option on AUTO SCAN mode.
<Caution> Move joystick to the right or the left to stop AUTO SCAN mode but after few
seconds the auto scan action again. If you want to stop this function, send "STOP"
command by the controller.
4.2.1.1 AUTO SCAN SETTING
1) Scan Mode :
ㆍCW : Clockwise auto scan
ㆍCCW : Counterclockwise auto scan.
ㆍCustom : Patrol the area set by the user on "Custom set".
2) Scan Speed :
Default value is "5"
3) Custom Set :
right end position using the joystick and press "IRIS OPEN" or "MENU" key to
complete custom set.
4) Run Auto Scan :
5) Move the joystick to stop the auto scan, after few seconds the auto scan again.
6) Send the command of Auto Scan Stop or menu key to move out the Auto scan.
Chapter 4. Menu configuration and operating

AUTO SCAN --------------------------------

Scan Mode:
Scan Speed:
Custom Set
Run Auto Scan
Back
Exit
[Menu 4-8] Auto Scan Menu
Max. 20 levels are selectable. Higher number means higher speed.
Limits the range of movement in the PAN direction. Determine the left/
Start the Auto scan by user setting mode.
Custom
01
28