Huviron SK-V207IR-Z946 User Manual page 24

ID SETUP ------------------------------------
3) Dwell Time : Set staying time in each position for preset.(Default : 5sec, The range
of Dwell time is 1~250.)
4) Speed : Set moving speed to preset position.(The range of speed is 1~20)
5) Group : Set the group number of SEQ SCAN function.
6) Edit Position : To change PTZ of the preset position.
7) Motion & Camera
"MOTION DETECTION")
8) Clear : This is to delete one or all preset position.
CLEAR PRESET ---------------------------
Number:
Clear All
BACK
9) Set : Save current value. If you don't run "set", the value will not save. After saving
is completed, The " * " appeared beside number
Chapter 4. Menu configuration and operating
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcd efgh i jklmn o pqrs tuv wx y z
1 2 3 4 5 6 7 8 9 0
+ - 4 / ! # * ~ , . : - ~ < > [ ] $ % &
<< >> Del Clear
Display:[.......................................]
Set
Back
[Menu 4-3] ID Setup Menu
: Motion detection is compatible with preset.(Please refer to 4.1.2
'Press Enter To Erase'
[Menu 4-4] Preset Clear Menu
24
001*