Download Print this page

Huviron SK-NV221 Quick Manual

2 mega pixel network vandal-proof dome camera

Advertisement

Quick Links

2 MEGA PIXEL
NETWORK VANDAL-PROOF
DOME CAMERA
SK-NV221 SERIES
QUICK GUIDE
1.4 Specification
1.4.1 Camera Specification
Item
Specification
Model No.
SK-NV221
SK-NV221IR
Megapixel network vandal-proof dome camera
Type
Image Sensor
1/2.8" SONY PROGRESSIVE SCAN EXMOR CMOS
Effective Pixels
1984(H) x 1225(V)
1920x1080 / 1280x1024 /
Resolution
1280x960 / 1280x720 / 1024x768 / 640x480 / 320x240
Scanning System
Progressive Scan
LED OFF : 0.01Lux
Min.Illumination
0.01Lux
LED ON : 0Lux(25M Range)
Alarm Input/Output
Input : 1, Output : 1
IR LED
-
24PCS
Lens
Vari-focal auto iris megapixel lens
1.4.2 Camera Function
Item
Specifications
Privacy Zone
ON / OFF(6 Programmable Zones)
Day&Night
Auto / Night / Day
WDR
WDR(1 ~ 5), (Back Light, Front Light)
Function
Auto : 1/25 ~ 1/5,000(NTSC), 1/12.5 ~ 1/8,000(PAL)
Electronic Shutter
Suppress Rolling, Manual
Sense Up
Auto(1 ~ 14)
White Balance
Auto / Indoor / Outdoor / Fluorescent / User
5
Chapter 1. Install and Specification
1.1 Safety Cautions
1) This camera may be damaged by electrical and physical shock.
Use regulated 12V DC, 1A power supply. Do not throw or drop it onto floor.
2) In case it is installed at high location, be sure to mount securely to prevent the
unit from falling below.
3) In case the unit fails, Do not try to disassemble the product.
Contact or consult the distributor or an authorized technician for after-sales
service.
Warranty void for the product disassembled without an authorization from the
distributor or an authorized technician.
4) All responsibility by using this unit is on the user.
5) This product has 2 models according to IR LED.
① SK-NV30(w/o IR)
② SK-NV30IR(with IR)
※This manual is based on SK-NV30IR.
If the product is to be put out of operation definitively, take it to a
local recycling plant for a disposal which is not harmful to the
environment.
1.2 Package
Camera
Quick Guide
2 MEGA PIXEL
NE TWORK VANDAL-PROOF
DO ME CAMERA
SK -NV221 SERIES
QU ICK GUIDE
Software & User Manual CD
Screw
4x25
Tp1 3EA
2
1.4.3 Network Specification
Classification
Item
Specification
OS
Embedded Linux
Network Interface
RJ45 10/100BaseT, Ethernet
Setting
By web browser
Leased Line, Cable Modem, Support Dynamic
Network Support
IP and Static IP, ADSL usable under Router
Summary
TCP/IP, UDP/IP, RTP, RTSP, RTCP, NTP,
Supported Protocol
HTTP, DHCP, FTP, SMTP, DNS, DDNS
Security
User authentication
PC OS
WINDOWS XP, WINDOWS VISTA, WINDOWS 7
Web Browser
IE 7.0 or higher
Compression
H.264, MPEG-4, MJPEG
1920x1080 /
Resolution
1280x1024 / 1280x960 / 1280x720 /
1024x768 / 640x480 / 320x240
Image
Compression Rate
200 : 1(Typical)
Frame Rate
Max. 30fps(@1920X1080)
Bit Rate
64 ~ 9000kbps
Simultaneous Access
Max. 10 users
Video Recording
Recording in client PC with CMS or FTP Server
Motion Detection
Support
Privacy Zone
Support
OSD
Support
Function
Alarm Input/Output
Support
Dynamic IP
Support
IP Router
Support
DDNS
Support
6
1.3 How to Install
1.3.1 Camera installation
Fix the camera set with the supplied screws on ceiling or wall mount. If you
don't use supplied screws, the camera may fall off.
Put a sticker on the ceiling and make holes according to the spots marked on
a sticker.
<Ceiling mount>
Ø3.5 Ø30
MOUNT HOLE PLATE(STICKER)
Put a sticker on the ceiling and make holes
according to the spots marked on a sticker
SCREW Tp1 4x25 3EA
<Wall mount>
Ø30
Ø3.5
MOUNT HOLE PLA TE(STICKER)
Put a sticker on the ceiling and make holes
according to the spots marked on a sticker
SCREW Tp1 4x25 3EA
3
1.4.4 Electric Specification
Classification
Specification
Power Supply
Regulated 12V DC, PoE(Power over Ethernet) - IEEE802.3af
Current Consumption
Max. 1A(DC 12V) IR LED ON
Operation Temp.
-10℃ ~ 50℃
Preservation Temp.
-20℃ ~ 60℃
Dimension
Ø150.5 x 95.6(H)mm
Weight
Approx. 400g
1.4.5 Alarm Input/Output
Alarm-in
A
B
GND
C
Alarm-out
D
DC 12V/100mA out
1.4.6 Audio Input/Output
MIC(Red)
LINE OUT(Black)
7
1.3.2 Camera Angle Adjustment
1) Pan adjustment : Grasp the disk of camera and then adjust direction to the
right or left(-160 ~ 190 )
°
°
2) Tilt adjustment : Grasp the LED cover of camera and then adjust direction to
°
°
the up or down(6 ~ 90 )
3) Roll adjustment : Grasp the camera holder and then rotate(-178 ~ 178 )
<Caution> If you try to adjust the camera out of limited angle, it might cause troubles
and damage to camera.
LED COVER
DI S K
R
L
U
CAMERA HOLDER
ROTATION
D
1.3.3 Lens Adjustment
After opening the LED cover,
1) ① By turning the "Tele-Wide" knob, you can
Access a range of focal lengths within specified limits.
2) ② Since then, by turning the "Near-Far" knob,
you can set the focus toward the wanted object.
1.3.4 Dimension
Ø100
Ø150.5
Ø129
4
1.4.7 Basic Setting Table
Item
Default(Basic setting)
Remarks
Network
Static IP/Dynamic IP
Static IP
IP Server Enable
Enable
IP Address
192.168.1.30
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
Web Connection
80
Port
RTSP Port
554
RTP Port Range
5000 ~ 5999
ID and Password
Administrator
admin/admin
ID/Password
User ID/Password
root/root, guest/guest
Domain of Related Server
DDNS Server
iplinker.net
Stream setting
rtsp://<ip address>:554/stream1
Stream 1
H.264 30fps@(1920x1080)
rtsp://<ip address>:554/stream2
Stream 2
None
Stream 3
rtsp://<ip address>:554/stream3
None
Video out*
After installation, deactivate it.
OFF
[Reference] In case to reset hardware and network setting, ID and password of user
and Administrator will be automatically returned to the above default value.
*Frame rate can be affected by the external video output option.
So factory default is off. When you install the camera, enable this option. Then
disable it after the installation.
8
°
°

Advertisement

loading

Summary of Contents for Huviron SK-NV221

  • Page 1 ° a sticker. unit from falling below. SK-NV221 SERIES <Caution> If you try to adjust the camera out of limited angle, it might cause troubles 3) In case the unit fails, Do not try to disassemble the product. and damage to camera.
  • Page 2 2.2.3 Input ID/Password 2.2.5 Complete the installation Chapter 2. Installation and Video Check 2.2.1 Change the setting value of PC network environment Upon installation, Web Viewer appears and image of camera is to be seen. Set IP Address, Subnet Mask and Gate-way of user's PC with 192.168.1.50 / Shown the main page, input ID and Password and click on "Viewer"...

This manual is also suitable for:

Sk-nv221irSk-nv211 series