Huviron SK-V207IR-Z946 User Manual page 41

- Top : Setting the top size of BLC Zone.(000~100)
- Bottom : Setting the bottom size of BLC Zone.(000~100)
- Left : Setting the left size of BLC Zone.(000~100)
- Right : Setting the right size of BLC Zone.(000~100)
ㆍHLC : HLC masks strong light sources from the camera lens, blocking them from
saturating the monitor screen.
- Mode : Determine whether to use the HLC or not.
- Level : Three HLC operation levels are available(Low/Middle/High)
- Color : Adjust the masking brightness.(00~15)
5) White Balance : Adjusts the balance of the screen colors
ㆍATW/IN :
Adjusts the screen color to be optimal in an indoor environment.
ㆍATW/OUT :
Automatically adjusts the screen color to be optimal in bright outdoors
environments.
ㆍAWC : Adjust the screen color when the camera is beginning
ㆍManual : Enables customization of the Red and Blue gain.
6) Brightness :
Adjust the screen brightness. (000~100)
7) AGC :
AGC adjusts the camera's gain control and the screen brightness if the camera
has captures an object under low-light condition. The Low, Medium, High and
Manual modes are available.
Chapter 4. Menu configuration and operating
------------------------
USER HLC SETUP
Mode:
Level:
Color:
Save&Back
Back
[Menu 4-27] HLC Setup
41
On
Low
10