Huviron SK-V207IR-Z946 User Manual page 14

③ Baud rate setting switch
- Select baud rate.
- Baud rate setting is as described on <Table 2-3>.
Baudrate
2400 bps
4800 bps
9600 bps
19200 bps
④ NTSC/PAL setting switch
- ON : NTSC
- OFF : PAL
- Please refer to <Table 2-4>.
NTSC/PAL
⑤ Factory default switch
- This is switch for camera reset.
- If reset is done at the switch "on", from next time it will be off.
- Factory default table is as follow.
⑥ Camera address switch
- It is to set camera ID to connect multiple cameras.
- Max. 255 of camera IDs(as binary notation) are available.
- Camera ID setting is as described on <T able 2-6>
[Table 2-3] Baud rate setting switch
NTSC
PAL
[Table 2-4] NTSC/PAL setting switch
RESET
ON
OFF
[Table 2-5] Factory default switch
14
SW3
OFF
ON
OFF
ON
Toggle Switch
Chapter 2. Overview
SW4
OFF
OFF
ON
ON
SW1
ON
OFF
SW8