Motion Detection - Huviron SK-V207IR-Z946 User Manual

4.1.1.2 CALL THE PRESET POSITION
1) Input the preset number you want to move on "NUMBER".
2) Incase " * " appears at the right of the number, press "IRIS CLOSE" button.
[TIP] With special controller(option), you can use "PRESET" function easily.
4.1.2 MOTION DETECTION(Path : MAIN MENU / PRESET / MOTION & CAMERA)
This is the sub menu for preset. You can set eight specific zones on the screen and
upon detection of motion on the zones, the camera would operate as what you set.
4.1.2.1 MOTION DETECTION SETTING
1) AUX Active :
ㆍOff : No action.
ㆍAUX1 : Relay upon detection of motion.
ㆍAUX2 : Activate output of "Open collector".
2) Dome Action
ㆍOff :
No action.
ㆍPTRN1 ~ PTRN4 :
ㆍCW : Scan clockwise automatically upon detection of motion.
ㆍCCW : Scan counterclockwise automatically upon detection of motion.
ㆍCUSTOM :
3) Motion Sense
4) Motion On/Off :
menu for setting Detection zone
Chapter 4. Menu configuration and operating
MOTION & CAMERA --------------------
AUX Active:
Dome Action:
Motion Sense:
Motion On/Off:
Preset 001 Cam Set
Set
Back
[Menu 4-5] Motion & Camera Menu
:
The camera move as PTRN1~PTRN4 upon detection of motion.
Patrol the area set by the user on "Custom set".
: Sets sensitivity of motion sensor. Low or High is selectable.
You can select enable/disable of the motion detection. This has sub
Off
Off
Low
Off
25