Pattern Scan - Huviron SK-V207IR-Z946 User Manual

4.2.3.1 RANDOM SCAN SETTING
1) Random Group :
positions randomly according to the group. Please refer to "4.1 PRESETS" to set group.
2) Run Random Scan :
3) Move the joystick to stop the auto scan, after few seconds the auto scan again.
4) Send the command of Random Scan Stop or menu key to move out the Random scan.
4.2.4 PATTERN SCAN(Path : MAIN MENU / MOTION CONTROL / PATTERN SCAN)
This function is to memorize the position by panning, tilting , or zooming for a while
and move the camera to the memorized positions. Save up to 4 patterns .
"PATTERN SCAN" repeats until user moves joystick or press "STOP" on the controller.
Chapter 4. Menu configuration and operating
RANDOM SCAN --------------------------
Random Group:
Run Random Scan
Back
Exit
[Menu 4-11] Random Scan Menu
Register up to 8 groups. The camera move s to the memorized
Run random scan user set group

PATTERN SCAN ---------------------------

Pattern Num:
Start Pattern Learn
Run Pattern
Back
Exit
[Menu 4-12] Pattern Scan Menu
30
1
1