Seq Scan; Random Scan - Huviron SK-V207IR-Z946 User Manual

Move Pan To Set L. Position
Press Iris Open Or Menu

4.2.2 SEQ SCAN

(Path : MAIN MENU / MOTION CONTROL / SEQ SCAN)
This function is to move the camera to the memorized positions one by one according
to the group.
4.2.2.1 SEQ SCAN SETTING
1) Seq Group :
to the group. Please refer to "4.1 Preset" to set group. Max. 8 groups are available.
2) Run Seq Scan :
3) Move the joystick to stop the seq scan, after few seconds the seq scan again.
4) Send the command of Sequential Scan Stop or menu key to move out the Sequential scan.

4.2.3 RANDOM SCAN

This function is to move the camera to the memorized positions randomly.
Chapter 4. Menu configuration and operating
[Menu 4-9] Custom Scan Setting Menu
SEQ SCAN ----------------------------------
Seq Group:
Run Seq Scan
Back
Exit
[Menu 4-10] Seq Scan Menu
The camera moves to the memorized positions one by one according
Run SEQ SCAN by user set group.
(Path : MAIN MENU / MOTION CONTROL / RANDOM SCAN)
Move Pan To Set R. Position
Press Iris Open Or Menu
1
29