3.1.6 PATTERN SCAN(Path : MAIN MENU / MOTION CONTROL / PATTERN SCAN)
This function is to memorize the position by panning, tilting , or zooming for a while and
move the camera to the memorized positions. Save up to 4 patterns .
"PATTERN SCAN" repeats until user moves joystick or press "STOP" on the controller.
<Notice>
Pattern Scan Setting / Playback, AUTO FLIP feature is automatically disabled.
3.1.6.1 PATTERN SCAN SETTING
1) Pattern Num :
2) Start Pattern Learn :
: Memory Left - Display the available number of memory.
3) Run Pattern :
<Notice>
Move the joystick to stop the pattern scan, after few seconds the pattern scan again.
Send the command of pattern Stop or menu key to move out the pattern scan.
Chapter 3. Menu configuration and operating
PATTERN SCAN ---------------------------
Pattern Num:
Start Pattern Learn
Run Pattern
Back
Exit
Set pattern number.(1~4) Default value is 1.
Start Pattern Learn : To move P/T/Z to memorize pattern.
Press IRIS OPEN Or Menu To Stop
Memory Left:
Run pattern.
1
000
35