Bracket Mounting Hole Locations; Mounting Surface Requirements - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

5.1 Bracket mounting hole locations

The location of the bracket mounting holes on each
display variant is shown below.
1
1
2
2
3
3
1 gS165 and gS195 bracket mounting hole
locations
2 gS125 bracket mounting hole locations
3
gS95 bracket mounting hole locations
76

5.2 Mounting surface requirements

Short desc is not printed, but is used in searches
This product is heavy. To prevent potential damage
to the product and / or your vessel, observe the
following BEFORE installing the product:
1
• Refer to the weight information provided in the
technical specification for this product and ensure
that the intended mounting surface is suitable for
bearing the weight.
1 • If the mounting surface is not suitable for the
product weight, you may need to reinforce the
mounting surface.
• If in doubt, refer to a professional marine
2
equipment installer for further guidance.
2
3
3
D12727-1
gS Series