Chart Application Overview And Features - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

18.1 Chart application overview and
features
The chart application provides route planning
and navigation features. The Chart application
is pre-loaded with world base maps. Compatible
electronic charts can be used to expand the
information and detail regarding your surroundings
and charted objects. Depending on cartography type
the chart application can be set to 2D or 3D view.
Typical Chart application includes the following
features to help you navigate your vessel safely and
effectively:
Features
Satellite-based navigation.
Route planning with
waypoints, routes and tracks.
Navigating using waypoints,
routes and tracks.
Choice of electronic 2D and
3D cartography.
Note: To obtain full 3D
detail, you must have
chart cards containing
3D cartography for the
appropriate geographic
area.
Enabling graphical overlays.
Waypoints, routes and tracks
backup and transfer
Display chart vectors
Display animated current and
tide information
Viewing information for
charted objects and deciding
which objects should be
shown or hidden.
Control the level of detailed
information displayed in the
Chart application
220
• GPS Status
• 17.1 Waypoints overview
• 17.2 Routes
• 17.3 Tracks
• 8.4 Saving user data and
user settings
• 18.3 Navigation options
• 18.2 Electronic charts
overview
• Electronic chart
specification
• Selecting 2D and 3D chart
views
• 18.11 Overlays
• 8.4 Saving user data and
user settings
• 18.12 Chart vectors
• Animated current
information
• Animated tide information
• 18.13 Cartography objects
• 18.14 Object information
• 18.10 Chart display
• Chart detail
Measuring distances and
bearings.
Alter the Chart application's
orientation to better suit your
needs.
Change (offset) the vessel
position in the Chart
application.
Chart application synchronization
Wireless electronic chart
(plotter) sync and waypoint
sync with Navionics Mobile
Marine app.
Plan your journey at home,
then transfer the routes to
your MFD.
Chart datum
The chart datum setting affects the accuracy of the
vessel position information displayed in the chart
application.
In order for your GPS receiver and multifunction
display to correlate accurately with your paper
charts, they must be using the same datum.
The default datum for your multifunction display is
WGS1984. If this is not the datum used by your
paper charts, you can change the datum used
by your multifunction display, using the system
preferences page. The system preferences page
can be accessed from the homescreen: Set-up >
System Settings > System Preferences > System
Datum.
When you change the datum for your multifunction
display, the chart grid will subsequently
move according to the new datum, and the
latitude/longitude of the cartographic features will
also change accordingly. Your multifunction display
will attempt to set up any GPS receiver to the new
datum, as follows:
• If your multifunction display has a built in GPS
receiver it will automatically correlate each time
you change the datum.
• If you have a Raymarine GPS receiver using
SeaTalk or SeaTalk ng
correlate each time you change the datum on the
multifunction display.
• If you have a Raymarine GPS receiver using
NMEA0183, or a third-party GPS receiver, you
must correlate it separately.
It may be possible to use your multifunction display
to correlate an NMEA0183 GPS receiver. From the
homescreen go to Set-up > System settings > GPS
Set-up > View Satellite Status. If the datum version
is displayed, it may be possible to change it. From
the homescreen go to Set-up > System settings >
Data Sources > GPS Datum.
• 18.18 Measuring distances
and bearings
• 18.7 Chart Orientation
• 18.8 Chart motion mode
• Navionics mobile marine
app
Refer to the Voyage Planner
manual for more information
(81339).
, it will automatically
gS Series