Chart Selection; Vessel Position On The Chart Display - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

18.5 Chart selection

You can select the cartography type to be used in
the Chart application. The Chart selection applies
to the active Chart instance. You must have the
necessary cartography chart cards inserted into your
multifunction display in order to display different
cartography type.
Selecting a cartography type
You can select the cartography type you want to
display in the Chart application.
Ensure you have inserted the chart card that
contains the cartography type you want to display.
From the Chart application menu:
1. Select Presentation.
2. Select Chart Selection.
A list of available cartography is displayed.
3. Select the cartography type you want to display
The Chart window is re-drawn to show the select
cartography type.
228
18.6 Vessel position on the chart
display
Your current position is represented on-screen by
the vessel symbol.
The vessel symbols are only displayed when
heading or COG data is available.
The vessel symbol varies depending on selected
settings and the availability of heading data.
Motor
Vessel
Sail Vessel The sail vessel symbol
Small
Vessel
Black dot
Vessel position data can also be shown in the
databar.
Locating your vessel
The vessel icon can be repositioned to the center of
the screen by following the steps below.
1. Select the Find Ship icon:
left hand side of the screen.
Locating your vessel
The vessel icon can be repositioned to the center of
the screen by following the steps below.
1. Select Menu.
2. Select Find Ship.
The motor vessel symbol
is used when the vessel
type selected during the
initial set up wizard is a
motor vessel.
is used when the vessel
type selected during the
initial set up wizard is a
sail vessel.
The small vessel symbol is
used when the Boat Size
setting is set to Small.
A black dot is displayed
when heading and COG
data is not available.
located on the
gS Series