Sonar Module Connection - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

Note: The maximum length for the radar power
and data digital cable (including any extensions)
is 25 m (82 ft).
Cables and connections

4.10 Sonar module connection

A sonar connection is required for fishfinder
applications.
The multifunction display can be used with the
following sonar modules:
• CP450C
• CP300
• CP100
Note: You must ensure that the cable ends
connected into the display and sonar module have
a locking / weather-tight mechanism.
Direct sonar module connection
On smaller systems (with only 3 network devices)
the sonar module may be connected directly to the
display.
1
SeaT alk
1. Multifunction display rear connector panel.
2. Sonar module.
3. Sonar transducer cable.
4. Sonar transducer.
Sonar module connection using a network switch
2
hs
SeaTalk /
RayNet SeaT alk
1. Multifunction display rear connector panel.
2. Network switch.
3. Sonar module.
4. Sonar transducer cable.
5. Sonar transducer.
hs
/ RayNet
1
3
hs
/ RayNet
3
4
D12896-1
4
5
D12897-1
57