Tools Required For Installation - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

HD-SDI additional parts supplied
The gS195 is supplied with the following additional
parts for use with the HD-SDI connection.
1
1 Protective boot
2 75 ohm BNC connector
4 Cable ties x 2 (to secure the protective boot)
40
2 3
D13051-2

3.10 Tools required for installation

1
3
6
1. Power drill.
2. Jigsaw.
3. Pozidrive screwdriver.
4. Adhesive tape.
5. Spanner for surface mounting or bracket
mounting fixings.
6. File.
7. Hole saw for flush mounting (For hole saw size
refer to your product's mounting template).
8. Drill bit for surface mounting or flush mounting.
Additional tools for Flush mounting
For best results when flush mounting the displays
it is recommended that a router is used to cut out
the rebate.
2
4 5
7 8
D12171-2
gS Series