Card Reader Connection - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

1 Fitting grounding strap to a gS95.
2 Fitting grounding strap to a gS125, gS165, or
gS195.
An extra screw and washer has been provided
for the gS125, gS165 and gS195 to secure the
grounding strap to the rear case.
The grounding strap can be connected to any of the
locations shown below.
1
1
1
gS165 and gS195 grounding strap points
2 gS125 grounding strap points
3 gS95 grounding strap points
Note:
All 4 holes contain plastic screws. The plastic
screws should be removed as follows:
• gS95 — ALL 4 plastic screws must be removed
to enable the mounting brackets to be attached.
• gS125 / gS165 / gS195 — The plastic screw
should ONLY be removed from the location you
want to use for the grounding strap point.
Do NOT use the plastic screws for attaching
mounting brackets or the ground strap.
50

4.5 Card reader connection

The card reader must be connected directly to the
dedicated card reader connector on the rear of the
display.
Note: Do not use cable extensions when
connecting the card reader to the display.
1
1
• Multifunction display.
• Card reader.
Note: The card reader must be connected directly
to the display.
D12887-2
1 2
D12698-1
gS Series