Osd Menu Options - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

OSD menu options

Setup menus
The setup menus provide a range of tools and
settings to configure the thermal camera.
The menus can be accessed from any controller on
the system. The menus are overlaid onto the video
image.
Note: The on-screen menus only appear on the
thermal camera image. They are not available
when viewing the visible light image (on dual
payload models).
Menus available
Enable Point Selecting Enable Point mode will turn point
Mode / Disable mode on, selecting disable point mode
Point Mode will turn point mode off. Only applies to
models with mechanical stabilization.
Video Setup This menu is used to set the video
configuration options.
Set Symbology Settings associated with the status icons.
User Configure the USER button on the JCU.
Programmable
Button
System Setup Settings to optimize operation for this
particular system / installation.
About / Help Helpful information and restore to factory
defaults setting.
Exit Cancels on-screen menu.
Video setup menu
Menu item /
Description Settings / Operation
Set Thermal Color This saves the current color setting as
the default value.
Default
Set Reverse Video This toggles the infrared image
or Set Video between white-hot (or red-hot if viewing
Polarity a color image) and black-hot.
Enable / Disable Enable or disable the thermal color
Color Thermal palettes:
Video
• Enabled – Greyscale, Red, Sepia,
Rainbow and Fusion palettes are
available.
• Disabled – Only Greyscale and Red
palettes are available.
Display Test Use the display test pattern when
Pattern setting up the color / contrast settings
for your particular display or monitor.
You can switch through the 4 test
patterns available.
Exit
352
Set symbology menu
Menu item /
Description Settings / Operation
Enable / Disable • Enabled – The PC icon is displayed
PC Icon whenever a PC is detected on the
network.
• Disabled – The PC icon is not
displayed.
Enable / Disable • Enabled – The JCU icon is displayed
JCU Icon whenever a JCU is detected on the
network.
• Disabled – The JCU icon is not
displayed.
Display All Icons Selecting this menu item enables all
available icons.
Display Minimal
Selecting this menu item reduces the
Icons icon activity:
• Position, Zoom, Rearview, Pause,
Stabilization disabled and Point
Mode enabled icons are unaffected.
• Home and Scene icons are
displayed only momentarily.
• Other icons are not shown.
Hide All Icons Selecting this option hides all icons
except for:
• Position indicator
• Rearview mode enabled
• Stabilization disabled
• Point mode enabled
Exit Returns to the main menu.
gS Series