Navigation Options - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

6 * Upload Sonar Logs and Community edits to
mobile device (Wi-Fi connection to MFD required)
7 ** Upload Sonar Logs and Community edits
anonymously to Navionics servers (internet
connection required)
Note:
* To participate in Navionics Sonar Charts, Sonar
logging must be enabled on your MFD. Sonar Logs
can be enabled from the Chart application menu:
Menu > Depth & Contour > Sonar Logs.
** The Sonar logs shall be uploaded to Navionics
servers anonymously.
To use this feature you must first:
1. Download and install the Navionics Mobile
Marine app, available from the relevant app
store.
2. Subscribe to Navionics Freshest Data.
3. Download Freshest data to your mobile device.
4. Enable Wi-Fi in the System Settings on the MFD.
5. Enable Wi-Fi on your mobile device.
6. Select the MFD Wi-Fi connection from the list of
available Wi-Fi networks on your mobile device.
C-MAP by Jeppesen charts
Your display is supplied with world base maps and
depending on purchasing options a Jeppesen chart
card. You may also purchase extra Jeppesen chart
cards to get enhanced chart details and additional
chart features.
Your display is compatible with the following
Jeppesen chart cards:
• C-MAP Essentials
• C-MAP 4D MAX
• C-MAP 4D MAX+
Refer to the Raymarine website
rine.com) for the latest list of supported chart cards.
To check the current availability of Jeppesen chart
cards and types, please visit:
or c-map.jeppesen.com.
Chart application
(www.rayma-
www.jeppesen.com

18.3 Navigation options

The chart application provides features to help
navigate to a chosen location.
The navigation options are found in the Navigate
menu: Menu > Navigate
• Pilot Controls — Accesses the Pilot Control
Dialog, when Autopilot Control is enabled.
• Goto Cursor — Will set the cursor position as the
active destination.
• Goto Waypoint — Provides options to navigate to
a waypoint stored on the system
• Stop Goto — Stops the Goto Cursor or Goto
Waypoint.
• Stop Follow — Stops following the current route.
• Restart XTE — Restarts the Cross Track Error.
• Advance Waypoint — When following a route,
skips to the next waypoint in the route.
• Follow Route — Provides options to navigate to a
route stored on the system
• Start Track / Stop Track — Will initiate a track on
screen to plot your course as you progress or stop
a track that is currently being created.
• Build Route — Provides options to build a route.
Refer to Chapter 17 Waypoints, Routes and Tracks
for details on creating waypoints, routes and tracks.
Navigation
Navigating to a waypoint on the screen
From the chart or radar application:
1. Select the waypoint.
The waypoint context menu is displayed.
2. Select the Goto Waypoint.
Note: With an active waypoint selected you can
select Stop Goto option from the waypoint context
menu at any time to cancel the action.
Navigating to a waypoint using the waypoints
group list
From the Chart application:
1. Select WPT.
The waypoint menu is displayed.
2. Select Waypoints.
The waypoints group list is displayed.
3. Browse the group list for the relevant waypoint.
4. Select the waypoint.
The waypoint options dialog is displayed.
5. Select Goto.
D11753-2
225