Table of Contents
Advertisement
11.6 Manually displaying the pilot
control dialog box
You can also open the Pilot Control dialog at any
time from the homescreen or chart application.
1. From the homescreen:
i. Select Set-up.
ii. Select Pilot Controls.
2. From the chart application:
i. Select Menu.
ii. Select Navigate.
iii. Select Pilots Controls.
Autopilot control
11.7 Pilot Control dialog
The Pilot Control dialog can be used to control
autopilot functions.
Pilot Control dialog (standby)
The example below shows the Pilot Control dialog
options when the dialog is opened from a menu or
using a dedicated physical Pilot button.
Selecting Auto will engage the autopilot and
maintain the current heading.
Pilot Control dialog (Auto)
The example below shows the Pilot Control dialog
options when Auto (locked heading) has been
engaged.
1
2
3
4
Description
1
Pilot Status — Current pilot mode.
2
Left Arrow — Decrease locked heading angle.
3
Rudder bar — Indicates the position of the rudder.
4
STANDBY — Disengages the autopilot and returns to
manual vessel control.
5
Current locked heading.
6
Track — Engages the autopilot in Track mode and
automatically steers your vessel to a target waypoint or
along a route plotted on your chartplotter.
7
Right Arrow — Increase locked heading angle.
8
Close — Closes the Pilot Control dialog.
Pilot Control dialog (Starting navigation)
The example below shows the Pilot Control dialog
options when Goto Cursor, Goto Waypoint or
Follow Route has been selected.
1
2
3
4
5
6
5
6
8
7
D12882-1
9
8
7
D12206-2
155
- Quick Links:
- Memory Cards and Chart Cards
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
