Data Master; Parts Supplied - Lighthouse Raymarine gS95 Installation And Operation Instruction Manual

3.8 Data master

Any system containing more than one networked
multifunction display must have a designated data
master.
The data master is the display which serves as a
primary source of data for all displays, it also handles
all external sources of information. For example
the displays may require heading information from
the autopilot and GPS systems, usually received
through a SeaTalk ng or NMEA connection. The data
master is the display to which the SeaTalk, NMEA
and any other data connections are made, it then
bridges the data to the SeaTalk
compatible repeat displays. Information shared by
the data master includes:
• Cartography
• Routes and waypoints
• Radar
• Sonar
• Data received from the autopilot, instruments, the
engine and other external sources.
Your system may be wired for redundancy with data
connections made to repeat displays. However these
connections will only become active in the event of a
fault and/or reassignment of the data master.
In an autopilot system which does not contain a
dedicated pilot control head the Data master also
acts as the control for the autopilot.
Planning the installation
hs network and any

3.9 Parts supplied

The following parts are supplied with your product.
1
7
15
1
Multifunction display
2 2 x Display mounting brackets
3 RCR-2 Remote Card Reader
4 Mounting gasket for RCR-2
5 Document pack
6
RCR-2 inlay card x 2
7 Sun cover
8 4 x Mounting bolts, washers, lock nuts and feet
9 4 x Bracket fixings
• gS95 = M5 x 25 pan head
• gS125 and gS165 = M5 x 25 countersunk
• gS195 = M5 x 60 countersunk
10
4 x RCR-2 fixings (self-tapping screws)
11
M5 x 10 pan head screw (not supplied with gS95)
12 M5 Wavy washer (for additional grounding strap)
13 1.5 m (4.9 ft) Power / Data cable
14 2 m (6.6 ft) Video / Alarm cable
15 Display mounting gasket
16 2 m (6.6 ft) RayNet cable
17 Auxiliary alarm
18 1m (3.28 ft) SeaTalk
2 3
4 5
6
8 9 10
11 12
13
14
17
16
18
ng spur cable
D12886-2
39