Table of Contents
Advertisement
5.10 daily post
Daily post allows a group of forms to be hand-fed, folded and inserted. Up to 8 forms of
80gsm (20lbs bond) may be fed, and they may be stapled or not, as required.
To use daily post, you must first create a new job using Handfeed. Select 'New Job' from the
Main Menu and ensure that the Handfeed box is ticked. Note that other sheets and inserts
can also be collated with the hand-fed daily post if required, up to the limits shown in 'Spec-
ifications'. Select 'Done' and edit the envelope and mail items in the same way as any other
new job ('Creating a New Job' on page 21). When finished, save the job to a suitable name.
To run daily post, load feed hoppers as required if you have selected additional folded sheets
or inserts ('Loading Paper Hoppers' on page 33). Select the job from 'Run Job' on the Main
Menu and press the Run button. Insert the daily post documents into the handfeed tray on
the folder as shown below - the forms will then automatically be fed and the machine will
await further documents. Note that the tower folder is shown – feeder folder is similar prin-
ciple, but design is different.
Load the daily
post with print
side facing rear-
wards and top of
form downwards.
When you have finished running daily post, Press the stop button as normal.
32
Other paper orienta-
tions are possible for
non-standard envelopes
- see Appendix A for
details.
Advertisement
Table of Contents
