Table of Contents
Advertisement
5.9
Supervisor mode
Supervisor mode can only be accessed by input of the correct PIN. It allows a variety of ma-
chine functions, as described below.
Language
Select required operating language from available list.
firmware version
Read-only display of firmware for each module fitted.
Machine Count
Read-only display of the total cycle count to date (this count cannot be reset).
enable Supervisor PIN
Enables/disables the need to enter a PIN for Supervisor access.
Change Supervisor PIN
Change the PIN to any 3-digit number.
delete Job
Presents a list of all jobs to allow deletion. When asked to confirm, press
for 'yes' or x for
'no'. Note that once deleted, a job cannot be recalled.
User access
Use to set the screen displayed at startup and the level of operator access to machine func-
tions. If any box is deselected, user will not be able to change or use this function - it does
not mean the function is disabled.
default Max. folds
Use to set the max. sheets to fold for 'C', 'Z', 'V' & double 'V'. (defaults are 5, 5, 8 & 4 re-
spectively). Used by the software to determine how to split a pack for folding. Adjust only
if using non-standard paper, or for other specific purposes. Note that these maxima can be
overidden in 'Advanced Settings' described on page 19.
default Sheet / Insert / envelope
Use to set the defaults for these items (these can overidden when setting size options in
'Create Job').
cont.
30
Advertisement
Table of Contents
