Creating A New Job - Formax 7100 Series Operator's Manual

5.6

Creating a new job

Select 'New Job' from the main menu to display the Create screen as shown:
Enter the total number of folded sheets (max. 6), the number of inserts (max. 6), whether
handfeeding is to be used and whether the document is a card carrier (only available if a
Cardfolder is fitted. Note: the possible settings will depend upon the hardware configuration
of the machine - if you attempt to create an 'illegal' setup, an error message will be dis-
played.
If you select Handfeed, by default the machine will expect the document to be fed into the
handfeed hopper in the folder unit on the last station (when fitted). If a track mounted
folder unit is also fitted, the graphic on the display will indicate which one to use. Select
Card Carrier only if a card folder is fitted to the machine.
Select 'Done' when finished to move on to editing the envelope and document settings.
Note: when 'Done' is selected, you cannot return to this screen, hence sheets or inserts
cannot later be added to or removed from the job.

The graphic indi-
cates where the
inserts and folded
documents should
be placed. Note
that it may be
different to that
shown, depend-
ing upon machine
configuration
cont.
21