Table of Contents
Advertisement
5.6.3 Saving the job
When all documents and inserts have been edited, you move to the Save screen, which al-
lows you 'Save As' to a new jobname (for a new job), or 'Save' (if editing an existing job).
To enter a new jobname, select 'Save As', as shown below:
Use the Scroll Up/Down buttons to select the first character, then press
. This moves to
the second character, and so on, up to the maximum 10 characters. When finished, press x
to exit the screen. Confirm your changes, and your new job is now saved and will appear on
the Run Job menu.
26
Advertisement
Table of Contents
