Table of Contents
Advertisement
5.6.2 Documents
Press
to highlight 'Edit item' scroll box, then use the scroll-up button to select #2 (this is
usually the prime, or address document). Options are explained below.
Address
Add. Position
Sel. Template
Size
Feed Count
Feed Mode
Packlength
Fold Type
View Fold Set.
Feed Orient.
Fold Mode
Mark read
Cascade
Deselect only if #2 is not the address document. Note that #2 is as-
sumed to be address document, #3 onwards is assumed not to be.
Options are Top / Middle / Bottom.
Select from the available list if required. Restore means no template.
Use a standard size, or 'Custom' (this enables length and width set-
tings).
Multiples of the document, up to 8.
Options are Feed always / OMR or Barcode selects / Off
Adjust as required only if calculated setting is not suitable.
Use a standard size, or 'None' (this should be selected only if you
have a special job and intend to use advanced settings in 'View Fold
Settings' (see below).
Displays your settings and allows custom adjustment if 'Advanced' is
selected. Note: 'Advanced' should only be used if you have a
special job and know what fold-plate settings are required -
inappropriate settings may result in operating problems. When
you have finished with 'View Fold Settings', select 'Done' to return to
the remainder of the settings.
Select Face up (which will be top of form trailing) or Face down (top
of form leading). Default is Face Up which will suit most jobs.
'Together' means all sheets fed from tower folder unit will be collated,
then folded. 'Singly' means sheets will be fed and folded individually.
'Via accumulator' means sheets will feed into accumulator before fold-
ing. Note: options available will depend upon the actual unit fitted.
Options are OMR / Barcode / None. If OMR or Barcode are selected,
you will move to further settings (see below) when you have finished
in the above screen - see sections pages 27 & 29 for full details.
If selected, continues to feed from the next hopper down if this one
runs out of paper.
The settings that appear may
be fewer than those described
below, depending upon wheth-
er the item is a folded form or
an insert. If a card carrier is se-
lected at the previous screen,
settings shown here will be
slightly different.
23
Advertisement
Table of Contents
