PC Configuration
Linux Clients
To access the Internet via the Wireless Router, it is only necessary to set the
Wireless Router as the "Gateway".
Ensure you are logged in as "root" before attempting any changes.
Fixed IP Address
By default, most Unix installations use a fixed IP Address. If you wish to continue
using a fixed IP Address, make the following changes to your configuration.
To act as a DHCP Client (recommended)
The procedure below may vary according to your version of Linux and X -windows
shell.
1. Start your X Windows client.
2. Select Control Panel - Network
3. Select the "Interface" entry for your Network card. Normally, this will be called
4. Click the Edit button, set the "protocol" to "DHCP", and save this data.
5. To apply your changes
Other Unix Systems
To access the Internet via the Wireless Router:
Downloaded from
www.Manualslib.com
Set your "Default Gateway" to the IP Address of the Wireless Router.
Ensure your DNS (Name server) settings are correct.
"eth0".
Use the "Deactivate" and "Activate" buttons, if available.
OR, restart your system.
Ensure the "Gateway" field for your network card is set to the IP Address of the
Wireless Router.
Ensure your DNS (Name Server) settings are correct.
manuals search engine
52