Subaru 2002 Impreza Service Manual page 60

FUEL LINE
Fuel Injection (Fuel System)
C: FUEL INJECTORS
0
The MFI system employs top feed type fuel injectors.
0
Each injector is installed in the fuel pipe in such a way that the injector is cooled by fuel.
0
The features of this type of fuel injector are as follows:
1) High heat resistance
2) Low driving noise
3) Easy to service
4) Small size
0
The injector injects fuel according to the valve open signal from the ECM. The needle valve is
lifted by the solenoid which is energized on arrival of the valve open signal.
0
Since the injector's nozzle hole area, the lift of valve and the fuel pressure are kept constant, the
amount of fuel injected is controlled only by varying the duration of the valve open signal from the
ECM.
0
The multi-hole nozzle makes it possible for the injector to produce fire fuel particles, which en-
hances the combustion efficiency and output performance of the engine.
NF0388
FU-10