Subaru 2002 Impreza Service Manual page 306

I
Drive Shaft System
REAR AXLE
C: REAR DRIVE SHAFT
A double offset joint (DOJ) is used on the differential side of each rear drive shaft. The DOJ can
be disassembled for maintenance. It provides a maximum operating angle of 23" and can be
moved in the axial directions.
0
A bell joint (BJ) is used on the wheel side of each rear drive shaft. Its maximum operating angle
is 42".
1. NON-TURBO MODELS
0
(3)
(1) DOJ
(2) BJ
(3) Differential side
(4)
Wheel side
(4)
0
NF0156
2. TURBO MODELS
0
A double offset joint (DOJ) is used on the differential side of each rear drive shaft. The DOJ can
be disassembled for maintenance. It provides a maximum operating angle of 23" and can be
moved in the axial directions.
0
A high efficiency compact ball fixed joint (EBJ) is used on the wheel side of each rear drive shaft.
Its maximum operating angle is 42".
(3)
(1)
DOJ
(2) EBJ
(3) Differential side
(4) Wheel side
DS-8
(4)
NF0157