Table of Contents
Advertisement
F a n l e s s P a n e l P C s
Installation 2:
Applicable for Windows 9x/2000/ME/XP
1.
Insert the PC-3200 CD Diskette into the CD ROM Drive.
2.
Click on Start button, select the Settings, and then click on the
Control Panel icon.
3.
Double click on the Add/Remove Hardware icon and Add New
Hardware Wizard will appear. Click on the Next button.
4.
Select Search for the best driver for your device (Recommended)
and click on the Next button.
5.
Select Specify a location, click on Have Disk button then key in the
CD-ROM path and specify component drivers and OS folders. Then
click on the Next button.
6.
The Wizard shows that Windows driver file search for the device: (For
example, Ethernet devices, the list appear Realtek RTL8139/810X
Family PCI Fast Ethernet NIC (8-23-2001). Click on the Next
button.
7.
The system will ask you to insert Windows 98 CD Diskette. Click on
the OK button to insert Diskette and key in path.
8.
Click on the OK button.
9.
Click on the Finish button to finish installation process. And allows
the system to reboot.
Installation 3:
Applicable for Windows NT 4.0
1.
Insert the PC-3200 CD Diskette into the CD ROM Drive.
2.
Start system with Windows NT 4.0 installed.
IMPORTANT: When the "Please select the operating system to
start..." message is displayed, select "Windows NT Workstation
Version 4.00 [VGA mode]".
PC-3200 Series User Manual V1.2
P C - 3 2 0 0
65
Advertisement
Table of Contents
